2
309407
Table of Contents
Warnings
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts
14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data
17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Standard Warranty
18
. . . . . . . . . . . . . . . . . . . . . .
Graco Information
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
SKIN INJECTION HAZARD
High–pressure fluid from dispense device, hose leaks, or ruptured components will pierce skin. This
may look like just a cut, but it is a serious injury that can result in amputation.
Get immediate surgi-
cal treatment.
D
Do not point the dispensing device at anyone or any part of the body.
D
Do not put your hand over the end of the fluid outlet.
D
Do not stop or deflect leaks with your hand, body, glove, or rag.
D
Follow the
Pressure Relief Procedure
on page 7 before you clean, check, or service the
equipment.
D
Tighten all fluid connections before operating the equipment.
D
Check the hoses and couplings daily. Replace worn or damaged parts immediately.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
D
Keep clear of all moving parts when starting or operating the pump.
D
Before checking or servicing the equipment, follow the
Pressure Relief Procedure
on page 7 to
prevent the equipment from starting unexpectedly.
