Pressure Relief Procedure
333126A
11
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
1. Set function selection switch to OFF and unplug
sprayer.
2. Turn pressure control knob to lowest setting.
3. Hold gun to side of grounded, metal pail. Trigger the
gun to relieve pressure.
4. Turn prime valve down.
If you suspect spray tip or hose is completely clogged,
or that pressure has not been fully relieved after follow-
ing these steps,
VERY SLOWLY
loosen tip guard
retaining nut or hose end coupling to relieve pressure
gradually, then loosen completely. Clear tip or hose
obstruction.
5. Engage trigger lock.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the Pressure
Relief Procedure when you stop spraying and before
cleaning, checking, or servicing the equipment.
ti22596a
ti22599a
AIRLESS
OFF
AA
(Air-Assisted)
395
595
ti22566a
ti2719a
Summary of Contents for FinishPro II 395
Page 7: ...Notes 333126A 7 Notes ...
Page 41: ...Notes 333126A 41 Notes ...
