Installation
4
307906ZAA
Installation
Typical Installation
Install the accessories in order shown in the typical installation in F
IG
. 1. The installation shown in F
IG
. 1 is only a
guide for selecting and installing a pump; it is not an actual system design. Contact your Graco distributor for assis-
tance in designing a system to suit your needs.
NOTE:
Blow out all lines with compressed air before you connect the pumps.
KEY
A
Air shutoff valve
B
Air filter
C
Air regulator and gauge
D
Air motor lubricator
E
Bleed-type master air valve (required, Part No. 110223)
F
Air and fluid hose kits
G
Ground wire (required Part No. 222011)
H
Fluid shutoff valve
J
Wall bracket
K
Universal pump (Model 222051)
L
Suction kit
M
55 gallon drum bung-mount pump (Model 222103)
N
Fluid drain valve (required Part No. 210658)
P
Air inlet
Q
Ball valve (fore releasing collected moisture)
R
Thermal relief kit (required for permanent installations,
Part No. 237601)
28 Bung adapter
NOTICE
Always mount the pump firmly to a wall bracket or a
bung on a drum. Never operate pump while it is not
mounted. Such use could damage the pump and fit-
tings.
NOTICE
Do not hang the air accessories directly on the air
inlet (P). The fittings are not strong enough to support
the accessories and may break. Provide a bracket on
which to mount the accessories.
F
IG
. 1
