Assemble Bracket and Install the GLC2200 Controller (if equipped)
12
333546B
NOTE:
Images may include optional equipment.
Assemble Bracket and Install the GLC2200 Controller
(if equipped)
NOTE:
All parts included in the mounting bracket kit may not be required for your installation. The bracket assembly
shown in F
. 16 is provided as a guide. The bracket is designed to be assembled in several configurations. Assem-
ble the parts as needed to best accommodate your installation.
1. Assemble the GLC2200 mounting bracket.
NOTE:
. 16 is only provided as a guide. Parts
can be rotated to best suit your installation location
and to provide optimal orientation for operator
access inside the cab.
2. Attach the controller to the bracket using the hard-
ware provided in the kit.
3. Install the bracket inside the cab using existing
holes in the cab using the hardware provided in the
kit (F
F
IG
. 16
NOTICE
Never install controller directly to the cab. Do not drill
holes or weld on any part of the cab. Drilling or weld-
ing on the cab will likely void the cab certification for
Roll Over Protective Structures (ROPS) and Falling
Object Protective Structures (FOPS).
F
IG
. 17