Install G3 Pump
10
333546B
NOTE:
Images may include optional equipment.
Install G3 Pump
Install the pump in a protected area near the cab. The installation location should have ample space around the
pump to allow for the hoses, cables and a relief valve.
•
The deck plate that surrounds the cab is the preferred installation location (F
. 13). The deck plate is a non-crit-
ical component and therefore drilling through the deck plate is generally acceptable by most manufacturers.
However, if this location is not acceptable due to durability or space constraints, identify an alternate location
around the cab such as below the ladder, in the engine compartment or on the frame.
•
A custom pump mounting bracket may be required if the preferred or alternative locations (referenced above) are
not acceptable for mounting the pump.
NOTICE
Never install pump directly to the cab. Do not drill holes or weld on any part of the cab. Drilling or welding on the
cab will likely void the cab certification for Roll Over Protective Structures (ROPS) and Falling Object Protective
Structures (FOPS).
F
IG
. 13
Recommended Installation
Components
Option 2
Option 1
