Setup
Prime/Flush
Prime/Flush
Prime/Flush
To avoid fire and explosion, always ground
equipment and waste container. To avoid static
sparking and injury from splashing, always flush at
the lowest possible pressure.
1.
Perform
Pressure Relief Procedure, page 12
.
2.
Remove tip and tip guard from gun.
3.
Place material supply suction hose into
compatible fluid (if priming) or solvent (if flushing).
4.
Close drain valve.
5.
Turn power switch (E) ON.
ON
6.
Prime or flush hose and gun:
a.
Disengage gun trigger lock.
b.
Trigger gun into grounded pail. Pull out
pressure adjustment knob (H) and turn
clockwise slowly to increase pressure, until
a steady stream flows from gun. Push knob
in to lock. If flushing
flushing
flushing, trigger gun until clean
solvent flows from the gun.
c.
Engage trigger lock.
3A3164D
13
