2
309098
WARNING
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D
This equipment is for professional use only.
D
Read all instruction manuals, tags, and labels before you operate this equipment.
D
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
D
Do not alter or modify this equipment. Use only Graco approved repair parts.
D
Check equipment daily. Repair or replace worn or damaged parts immediately.
D
Do not exceed the maximum working pressure of the lowest rated component in your system.
D
Use fluids and solvents that are compatible with the equipment wetted parts. Refer to the
Technical Data
section of all equipment manuals. Read the fluid and solvent manufacturer’s
warnings.
D
Handle hoses carefully. Do not pull on hoses to move equipment.
D
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not
expose Graco hoses to temperatures above 82
_
C (180
_
F) or below –40
_
C (–40
_
F).
D
Do not lift pressurized equipment.
D
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
D
Be sure breather is not plugged before filling reservoir.
D
Be sure unit is securely mounted before operation.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D
Ground the equipment and the object being dispensed to. See
Grounding
on page 5.
D
If there is any static sparking or you feel an electric shock while using this equipment,
stop
dispensing immediately.
Do not use the equipment until you identify and correct the problem.
D
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being dispensed.
D
Keep the dispensing area free of debris, including solvent, rags, and gasoline.
D
Do not smoke in the dispensing area.
