Dip Stick Installation
8
332515F
Dip Stick Installation
1.
Remove plug (a) from cover (b). Discard plug, you
will not reuse it (F
2.
Slide dipstick through hole (aa) in cover (b) and into
reservoir (F
. 19). Wrench tighten it in
place.
3.
To determine the level of the fluid remaining in the
reservoir, loosen and remove dip stick (c) from res-
ervoir cover (b).
4.
Use a clean rag to wipe oil/grease from end of dip
stick (c).
5.
Insert dipstick (c) through hole (aa) in cover (b) as
far down as it will go and then remove it again. Visu-
ally inspect level of oil/grease remaining on dip stick.
F
IG
. 18
a
aa
b
F
IG
. 19
c
b
aa
