Maintenance
3A6941J
39
39. Replace and tighten the bolts (55), nuts (56),
washers (57), and lifting ring (53) back onto the
cover (54).
NOTE: The lift ring for the 60 lb. tank is welded onto the
cover and is not removable.
40. Put the pump back into the tank (41) through the
cover and the gasket (49) (F
41. Place the four bolts (47) and four washers (48) into
place and tighten with a 5 mm Allen wrench (torque
16 ft-lb/21.7 N•m) (F
42. Reconnect the power to the system.
F
IG
. 79
54
57
55
56
53
F
IG
. 80
F
IG
. 81
41
49
41
48
47
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...
