Service
3A3005C
11
7.
Use a strap wrench on spacer tube (114) to unscrew
it out of the pump adapter (8) and slide it down as
far as it will go (F
. 5).
8.
Pull connecting rod (107) out of spacer tube (114) to
access the pin (204). Remove pin (204) (F
. 5).
9.
Unscrew displacement rod (35) from connecting rod
(107) from displacement rod (35) (F
. 5).
Replacing Throat Seals
NOTE:
Replace throat seals if fluid leaks excessively
through the weep tube (B), page 4. This procedure can
be done without disassembling entire reciprocator.
Disassembly
1.
Relieve pressure
, page 7.
2.
Disconnect reciprocator from displacement pump
(see Removing Displacement Pump from Recipro-
cator, page 10).
3.
Remove eight capscrews (15) and washers (27)
from bottom of pump adapter (8). Tap pump adapter
to loosen it and pull it off the motor housing (43)
(F
. 6).
F
IG
. 5
114
35
204
35
107
8
107
F
IG
. 6
15
27
8
43
