
Installation
4
3A3005C
Installation
Typical Installation
The following Typical Installation is only provided as a guide for selecting and installing system components and
accessories. Mount pump to suit the type of installation planned. For assistance in designing a system to suit your
needs, contact your Graco Distributor.
Key:
A
Drain line
B
Weep tube
C
Fluid outlet line
D
Drain valve (required)
E
Ground wire
F
Hydraulic return line, minimum 3/4 inch I.D. (required)
G
Hydraulic outlet, 3/4” NPT (f)
H
Return line shut-off valve, minimum 3/4 inch (required)
J
Hydraulic inlet, 3/4” -16 JIC (37° flare)
L
Supply line shut-off valve (required)
M
Pressure gauge
N
Pressure reducing valve (required in systems over 900 psi
[6.2 MPa, 62.1 bar)])
P
Accumulator
R
Flow control valve (required in systems over 3 gpm [11
lpm])
S
Hydraulic supply line
T
Check valve
U
Variable volume pressure compensated pump
V
Hydraulic power supply
W
Check valve
Y
Pressure gauge
Z
Check valve
AA Shut-off valve
BB Drain tube
CC 1/2 NPT outlet adapter (included)