Electric Motor
20
3A2247A
Installation
1 Phase, 240 VAC, 50 Hz Electric Motor
1.
Install pulley (43) and set screws (133). Torque set
screws to 60 in-lb (6.8 N•m). Make sure pulley is
flush with end of electric motor shaft.
2.
Install handle (175), bottom isolator plate (190) and
rocker plate (99) to electric motor (119) with four
screws (30) and nuts (174). Motor should be posi-
tioned all the way forward on rocker plate. Torque
screws (30) to 225 in-lb (25.4 N•m).
3.
Install motor assembly on sprayer.
4.
Swing electric motor retainer bracket (204) in.
Tighten electric motor nut (205).
5.
Install
Fan Belt,
page 14.
6.
Check to make sure fan pulley and motor pulley are
in line. Also check to make sure fan pulley shaft and
motor pulley shaft are parallel. Adjust as required.
119
204
99
193
191
192
174
190
175
30
133
43
205
ti18343a
ti18750a
ti18193a
ti5387a
Parallel
In Line
Fan Pulley (43)
Fan Pulley Shaft
Motor Shaft
Motor Pulley (133)
(end of motor pulley should
be flush with end of motor shaft)
ti18697a
