![background image](http://html1.mh-extra.com/html/graco/comfortsport-5-point/comfortsport-5-point_instruction-manual_2250783014.webp)
Pull front to back and left to right to check for
secure installation
(fig. c)
. Vehicle lap belt
MUST
stay tight.
If not secure, see “Vehicle Seat Belts” page 26.
Check level indicator on car seat.
Vehicle
must
be on level ground and
child in car seat when checking level indicator.
Ball
MUST
be entirely in green zone
(fig. d)
.
If necessary, place rolled towels under car seat,
at vehicle seat crease, until entire ball is in
green zone. Then re-check level indicator.
DO NOT
use tether
rear-facing
. Tether
must
be stored (see “Tether Storage” page 32).
Periodically check that car seat is securely
installed and properly leveled; adjust if
necessary.
Store
LATCH
belt by attaching to connectors
through forward-facing openings
(see page 23,
fig. k
).
•
Attach connectors to storage bar on each
side
(fig. a).
•
Adjust
LATCH
belt to remove excess
slack by pulling adjustment belt.
Adjust car seat to
recline
position (see page 18
and 19,
fig. b
) and place
rear-facing
on vehicle
seat.
Thread vehicle seat belt through openings and
buckle belt.
Press down firmly in center of car seat to
compress vehicle seat cushion while tightening
vehicle seat belt
(fig. b)
.
REAR-FACING
INSTALLATION WITH
VEHICLE SEAT BELTS
1
3
4
5
2
12
LATCH belt MUST be stored when
using vehicle seat belt to install car seat.
WARNING
6