Installation
334127D
7
Installation
Grounding
Pump:
the displacement pump is grounded with a wire
connecting the pump to the control enclosure. Locate
the small hole (W) in the pump outlet housing. Attach
the ground wire (Y) to the pump outlet housing using the
ground screw (X) supplied with your system. Tighten the
ground screw securely. Do not operate the equipment
without the ground wire in place.
Air compressor:
follow manufacturer’s recommenda-
tions.
Fluid supply container:
follow local code.
Object being dispensed:
follow local code.
Connect to a Graco Air Motor
The displacement pump may be installed on Senator,
Bulldog, King
®
, and NXT air motors using Tie Rod Kits.
See the following kit manuals for installation instruc-
tions.
The equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. Grounding provides an escape wire
for the electric current.
F
IG
. 2: Attach Grounding Wire
WLD
:
<
;
=
Manual
Tie Rod Kit
Air Motor
334131
24V752
Bulldog
Senator
King
334132
24V754
NXT
