![background image](http://html1.mh-extra.com/html/graco/a2a03010/a2a03010_operation-and-maintenance-manual_2251084013.webp)
Setup
3A0231F
13
Setup
NOTE:
diagram.
2.
3.
Perform Setup procedure for feed system compo-
nents. See feed system manual(s).
4.
Place an in-line air pressure regulator, air-water
separator/filter, and shut-off/bleed valve between
the air supply and the control solenoids.
5.
Connect each 1/4 in. outside diameter supplied air
line to the corresponding control solenoid. See
starting on page 9.
6.
Connect chemical lines from feed system to meter-
ing valve material inlets. See
Typical Installation
F
IG
. 5
Metering Valve
Pump
Material Tank (optional)
Fluid Shut-Off Valve
Air Supply
Air Shut-off and Bleed Valve
Air Pressure Regulator
User Supplied
Air-Water Separator/Filter
Control Solenoids