Installation/Operation
8
308491U
How to Flush the Gun
Always flush the pump and gun before the fluid being
sprayed can dry in it.
Note:
This procedure requires a grounded pail of
compatible solvent.
1. Relieve pressure.
2. Remove the tip guard and spray tip. Soak and clean
the parts.
3. Remove the pump intake from the original pail.
4. Put the pump intake in a grounded pail of compati
ble solvent.
5. Start the pump at its lowest pressure.
6. Trigger the gun into the original pail. When solvent
appears, release the trigger.
7. Now trigger the gun into the solvent pail. Circulate
the fluid until the system is thoroughly flushed.
8. Relieve pressure.
To reduce the risk of fluid injection or splashing in
the
eyes or on the skin, or static electric discharge when
flushing:
•
Be sure the entire system, including flushing
pails, are properly grounded.
•
Remove the tip guard and spray tip.
•
Maintain metal to metal contact between the gun
and the flushing pail.
•
Use the lowest possible pressure
ti04735a
