DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the
operator’s authority to operate the equipment.
Most problems have a simple solution. First, check that:
• Power is turned ON for both units
• Both units are plugged in (or batteries are fresh in Parent Unit)
• Electrical outlet works
• Volume is turned up on Parent Unit
• Parent Unit is in range of the Nursery Unit
No Sound
• Battery dead or weak — replace or use AC adapter.
• AC adapter not properly connected — check the connections.
• Nursery Unit covered or blocked — remove the obstruction.
Weak Sound
• Nursery Unit too far from baby — move closer.
• Large objects blocking the signal — try repositioning Nursery Unit.
• Volume setting too low — turn it up.
Static
• Interference from other electrical equipment — eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights,
light dimmers, etc.)
• Parent Unit too far from Nursery Unit — move them closer.
• Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings & buildings. Try moving
the Nursery Unit to another part of the room.
Shrill Sound (Feedback)
• Nursery Unit and Parent Unit too close together — move them farther apart.
• Volume set too high — lower the volume.
TroubleShooting
6
