• Some units come equipped with a Parent Finder feature. This feature will allow you to locate a misplaced Parent Unit as
long as the Parent Unit is powered on and within range of the Nursery Unit.
• To activate, press the “PF” button on the side of the Nursery Unit (the Nursery Unit needs to be ON).
• The Parent Unit will generate an audible beep every second and the soundlights will flash on and off.
• Once the Parent Unit is located, the audible beep can be shut-off by pressing any button on the Parent Unit.
Operation
To Listen To Baby
• Turn on Nursery Unit using the ON/OFF switch.
• Turn on one or both Parent Units using the ON/OFF switch.
• Adjust the volume on the Parent Unit by pressing the Volume Up/Down buttons. Note that the Sound Lights LEDs
illuminate as the volume button is pressed up or down to provide a visual feedback for the volume level. The unit will beep
louder or softer depending on the volume level.
• The Sound Lights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please
note that the Sound Lights and volume control on the Parent Unit are independent of each other. With the volume turned all
the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit.
Parent Finder Feature
5
Vibration Alert Feature
1.To turn on the Vibration Alert Feature, set the switch on the side of the parent unit to on.
2. To adjust the level at which the vibration alert is activated, press and hold the “Vibe” button on the side of the parent
unit. The sound lights will illuminate to show the vibration alert adjustment setting. Press the volume UP/DOWN switch
to change the setting. A lower sound light setting will make the vibration activate for quieter sounds. A higher sound light
setting will make the vibration activate for louder sounds. When the sound in the nursery goes above the sound light level
you choose, the vibration alert will be activated.
3. Release the “Vibe” Button.
NOTE: Vibration Alert Feature is deactivated when the monitor is on AC power.
