Operation
26
3A8179C
16. If flushing with water, flush again with
mineral spirits or Pump Armor
™
to leave
a protective coating to prevent freezing
or corrosion.
17. Wipe sprayer, hose and gun with a rag
soaked in water or mineral spirits.
Cleaning Fluid
Compatibility
•
When spraying
water-based
materials,
flush the system thoroughly with water.
•
When spraying
oil-based or flammable
materials, flush the system thoroughly
with mineral spirits or compatible
flushing solvent. When flushing with
solvents, always follow
•
To spray
water-based
materials
after
spraying oil-based or flammable
materials, flush the system thoroughly
with water first. The water flowing out of
drain tube should be clear and sol
-
vent-free
before
you begin spraying the
water-based material.
•
To spray
oil-based or flammable
materials
after spraying water-based
materials, flush the system thoroughly
with mineral spirits or a compatible
flushing solvent first. The solvent flow
-
ing out of the drain tube should not con
-
tain any water. When flushing with
solvents always follow
•
To avoid fluid splashing back on your
skin or into your eyes, always aim gun at
inside wall of pail.
