Related Manuals
3A6709B
3
3. Mount the inlet transducer monitor (A) inside the
system frame with screws (C) and washers (D).
4. Remove the pressure gauges (L) from the inlet
pumps.
5. Install the pressure transducer fittings (E,F,G) into
the ports the pressure gauges were removed from.
6. Route the transducer cables along the pumps and
connect them to the monitor. Secure the cables
along the pump tie bolts and along the lower pair of
EFR tie rods with the provided cable ties (H) as
shown in F
F
IG
. 2
F
IG
. 3
5
6
7
C
D
A
E,F,G
L
F
IG
. 4
H
H
H
H
