Service
312865H
31
Reassembly
Use all the new parts provided in the kit. Do not reuse
the old parts.
1.
Insert balls (3) in trip rod (2) (F
IG
. 42).
2.
Slide spring (1) over trip rod (2) (F
IG
. 42).
3.
Insert trip rod assembly in opening in meter housing
(F
IG
. 43).
4.
Turn meter over and place in vise. Align holes in trig-
ger assembly with holes in trip rod (2). Use the old
trip rod or a non-metal rod or dowel to push trip rod
up and out of the meter housing (F
IG
. 44) far enough
to see hole for pin (19) to slide into, however, do not
install pin in this step.
5.
Install trigger assembly (8) (F
IG
. 44). Push pin (19)
through holes in trigger and trip rod assembly.
6.
Install solenoid (12). Finger tighten securely.
7.
Install o-ring (5).
F
IG
. 42
F
IG
. 43
ti12014a
3
2
1
F
IG
. 44
F
IG
. 45
F
IG
. 46
ti12015a
19
2
8
ti12238a
12
ti11941a
5