Repair
Required Tools
• Torque wrench
• Bench vise, with soft jaws
• Rubber mallet
• Hammer
• O-ring pick
• 13 mm (1/2 in.) dia. brass rod
• Set of socket wrenches
• Set of adjustable wrenches
• Pipe wrench
• Screwdriver
• Heat gun
• G loves
• Thread lubricant
• Thread sealant
Disconnect the Pump
Heated fluid can cause severe burns and can
cause equipment surfaces to become very
hot. Wear protective gloves and clothing when
operating this equipment in a heated system. Allow
the equipment to cool thoroughly before servicing.
Note
The priming piston can be serviced
without disconnecting the displacement
pump from the motor. see
Replace Priming Piston, page 11
1. Flush the pump, if possible. Stop the pump at the
bottom of its stroke, to prevent fluid from drying
on the exposed displacement rod.
2. Relieve the pressure. See
Pressure Relief Procedure, page 8
3. Allow the pump to cool if being used in a heated
system.
Note
It may be necessary to use a heat gun to
ease disassembly of some parts.
4. Disconnect the air and fluid hoses.
5. Disconnect the pump from the heated platen.
6. Disconnect the displacement pump from the
motor as explained in your separate system
manual.
334127A
9
Summary of Contents for 24W150
Page 21: ...Notes Notes 334127A 21...