Graco 24R076 Instructions Download

Page: 4 / 4

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents.

Original instructions.

This manual contains English. MM 332355

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

www.graco.com

Marach 2014

Install the roller plate (a) to the roller support arms
using screws (b) removed in Step 5.

Reroute the hose (c) through the hose rollers (d).

10. Install the hose stop (e) and dispensing valve (not

shown) to end of hose (F

11. Remove c-clamp (B) (installed in Step 3). Unlatch

the reel and allow the hose to retract.

12. See the XD40/XD50 Hose Reel instruction manual

for overhead installation instructions.

. 6

. 7

Summary of Contents for 24R076

Page 1: ...For professional use only Part No XD40 24R076 XD50 24R077 Important Safety Instructions Read all warnings and instructions in this manual and the XD40 XD50 Hose Reel Installation and Operation Instruc...

Page 2: ...clamp A on the back of the hose reel base to secure it to a flat surface FIG 1 Graco rec ommends placing a rag over the back frame to pro tect this surface from damage when the clamp is tightened dow...

Page 3: ...ble for installation details Symbols and shown in FIG 5 refer to the Instal lation Hardware Table Use this Table to determine the hardware needed to install brackets on your hose reel and spring Insta...

Page 4: ...O INC AND SUBSIDIARIES P O BOX 1441 MINNEAPOLIS MN 55440 1441 USA Copyright 2013 Graco Inc All Graco manufacturing locations are registered to ISO 9001 www graco com Marach 2014 8 Install the roller p...