Charging the Battery (Series B)
332119E
9
Charging the Battery (Series B)
1. Place field marker in a dry, well-ventilated area
away from flammable or combustible materials,
including paints and solvents.
2. Before charging, make sure spray button (A) is out
(OFF position).
3. Plug charger into an electrical outlet.
4. Plug 12V charger jack into battery connection port
on field marker.
5. When charging is complete, disconnect charger
from electrical outlet. Then disconnect charger from
battery connection port on field marker.
Charger Indicator Lights
Battery charger is for indoor use only. Do not expose
charger to rain or snow. Charge battery with
Graco-approved charger.
NOTE:
Fully charge battery prior to first use.
A
ti20194a
ti2810a
ti24686a
ti7949a
Description
Appearance
Power on with no battery connected
Power LED is red
Desulfating
First charging light is green and stays on until the bulk
charge cycle starts.
Charging
Charging lights lite to indicate show the state of
charge.
Charged/Float charging
All four charging lights are on solid.
Reverse polarity
All four charging lights flash.
Sleep mode. If the battery is fully charged or the charged is
connected to a fully charged battery the charger may go into
the sleep mode.
All four charging lights dim and flash.
NOTE:
Disconnect charger from field marker after battery is fully charged. Charge times will vary from 0 - 14 hours
depending on level of discharge.
