Repair
332119E
19
Repair
Tip Removal/Cleaning
1. Perform
Pressure Relief Procedure
, page 10.
2. Rotate spray tip (X) 1/4 turn and remove.
3. Wash tip in sink under running water. Use a brush
or pick to remove excess or dried material.
4. Use a pressurized air hose to blow out any remain-
ing material from tip.
NOTE:
You should be able to
clearly see through the tip hole when cleaned.
5. Install spray tip (X) and position to spray as shown
below.
CleanShot
™
Cleaning (If
applicable)
1. Perform
Pressure Relief Procedure
, page 10.
2. Remove spray tip/guard assembly (G).
3. Remove CleanShot assembly (Y).
4. Use two wrenches to remove needle seat.
ti20183a
ti21497a
X
X
ti21361a
ti21360a
X
ti21382a
G
ti21383a
Y
ti21384a
