![background image](http://html.mh-extra.com/html/graco/24f307/24f307_operation_2250905025.webp)
Smart Control Operation
3A2090A Operation
25
Operation in Manual Mode
1.
Make sure engine is running and main power switch
is on.
2.
Use Gun Selector Switches to select guns and line
type.
3.
Press and hold Gun Trigger Control button to spray
a line. Release button to stop spraying.
Operation in Automatic Mode
Preset Skip Patterns
1.
In the
AUTOMATIC MODE
, the striper is equipped
with Preset Skip Patterns. To select a preset skip
pattern, press
MODE
button to move to
AUTO-
MATIC MODE
.
2.
Press
SETUP
button to view preset skip patterns.
3.
Use
SELECT
arrows to mark desired pattern. Press
SETUP
key to save and return to
AUTOMATIC
MODE
display.
4.
Use Gun Selector Switches to select guns and line
type.
NOTE:
Striper must be moving for guns to activate.
5.
With the striper moving faster than 0.3 mph (0.5
kph) press Gun Trigger Control Button to stripe.
Press button again to stop striping or reduce speed
to below 0.3 mph (0.5 kph).
ti9915b
,:B,DG"
!""#
$%&'()
ti18552a
ti18969a
ti18564a
,:B,DG"
!""#
$%&'()
ti9915b
@02
##,!#
8",B!:;
s
ti9942b
ti18969a
Programmed line pattern
OFF position disengages gun
Continuous line
ti18564a