![background image](http://html.mh-extra.com/html/graco/24f307/24f307_operation_2250905023.webp)
Smart Control Operation
3A2090A Operation
23
6.
Press
SETUP
twice to move to
CALIBRATION &
UNITS
display. Set
TRAVEL DISTANCE
to 25 ft.
Longer distances ensure better accuracy, depend-
ing on conditions.
\
7.
Align calibration bar rear edge with 1 foot on steel
tape.
8.
Push gun trigger control to start calibration.
9.
Move striper forward. Keep calibration bar over steel
tape.
10. Stop when calibration bar rear edge aligns with
26-ft. on steel tape (25-ft. distance).
11. Push gun trigger control to complete calibration.
12.
NEW CALIBRATION STORED
displays. Press
EXIT
. Calibration is now complete.
13. Go to
MEASURE
mode and verify accuracy by
measuring the tape (see
MEASURE MODE
).
Calibration Error Displays
This message is displayed if striper has rolled beyond
calibration length when gun trigger control is pressed to
end calibration.
This message is displayed if striper has rolled less than
calibration length when gun trigger control is pressed to
end calibration.
!""#
$%&'()
ti9915b
%*
+##,!#
-
/
023
ti9926b
ti10021a
1
FT
ti18564a
ti18717a
ti10022a
26 FT
ti18564a