Accessories
312497ZAB
41
Cycle Counters - Part No. 563444
The cycle counter assures that the lubricant is flowing through the system. Every count indicates one complete cycle
of the divider valve. Visual inspection and recording of counts provides a constant check on the performance of the
lubricant system and the pump. The cycle counter can be used on any MJ, MS, MH, MX and MXP divider valve
assembly.
Cycle Switches
The function of a cycle switch is to electrically assure that the lubricant is flowing through the system. Actuated by a
cycle pin, the cycle switch can be wired to various controls.
NOTE:
The cycle switch must be attached to a section that is equipped with a cycle indicator pin.
Part Numbers
Series Flo Divider Valves
MJ
MS/MH
MS (Nickel)
MX
MXP
MGO
Cycle Switch and Bracket Assembly
SPDT
563272
563272
563272
563272
563272
563269
Electrical Ratings: 15 amps at 125, 250 and 480 VAC; 1/2 amp at 125 VDC, 1/4
amp at 250 VDC, 6.0 amp at 24 VDC Non-Inductive
Replacement Switch
557781
557781
557781
557781
557781
557781
Cycle Switch and Bracket Assembly
DPDT
564357
564357
564537
564357
564537
NA
Electrical Ratings: 10 amps at 125 or 250 VAC; 0.3 amp at 125 VDC or 0.15 amp
at 250 VDC
Replacement Switch
NA
NA
NA
NA
NA
NA
Replacement Bracket for either
SPDT or DPDT Switch Assembly
557546
557546
557546
557546
557546
560573
Moisture Resistant Cycle Switch
with 6-foot Cable and Bracket
Assembly SPDT
563273
563273
563273
563273
563273
NA
Electrical Ratings: 5 amps at 125 or 250 VAC; Wire Code for Moisture Resistant
Switch: BK (Com), Red (N.C), WH (N.O.), GN (Ground)
Replacement Switch with 6-foot
Cable
557782
557782
557782
557782
557782
NA