308993 15
Daily Gun Care, Flushing, and Cleaning
CAUTION
Trigger the gun whenever you tighten or remove the
seat housing. This keeps the needle ball away from
the seating surface and prevents the seat from being
damaged.
9.
If it is necessary to remove the seat housing (13)
to clean, trigger the gun while you remove the seat
housing with the gun tool (36). Remove the seat
housing gasket (12b) and replace with a new
gasket.
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎ
ÎÎ
9119A
13, 12b
36
Fig. 12
18
14
33
10. Clean the air cap retaining ring (18), air cap (14),
and seat housing (13) with solvent.
11. Dip the end of a soft-bristle brush into a compatible
solvent. Do not continuously soak the brush’s
bristles with solvent and do not use a wire brush.
Fig. 13
02007
12. With the gun pointed down, clean the front of the
gun, using the soft-bristle brush and solvent.
9121A
Fig. 14
13. Scrub the air cap retaining ring, air cap, and spray
tip with the soft-bristle brush. To clean out air cap
holes, use a soft implement, such as a toothpick,
to avoid damaging critical surfaces. Clean the air
cap and spray tip daily, minimum. Some applica-
tions require more frequent cleaning.
ÎÎ
ÎÎ
ÎÎ
9239A
Fig. 15
Summary of Contents for 241508
Page 4: ...4 308993 Notes...
