3
308302
WARNING
PRESSURIZED EQUIPMENT HAZARD
Spray from the gun/valve, hose leaks, or ruptured components can splash fluid in the eyes or on the
skin can also cause serious injury.
D
Do not point the gun/valve at anyone or at any part of the body.
D
Do not stop or deflect leaks with your hand, body, glove or rag.
D
Follow the Pressure Relief Procedure on page 10 whenever you: are instructed to relieve pres-
sure; stop dispensing; clean, check, or service the equipment; and install or clean the nozzle.
D
Tighten all fluid connections before operating the equipment.
D
Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.
Permanently coupled hoses cannot be repaired; replace the entire hose.
MOVING PARTS HAZARD
Moving parts, such as the priming piston, can pinch or amputate your fingers.
D
Keep clear of all moving parts when starting or operating the pump.
D
Before servicing the equipment, follow the Pressure Relief Procedure on page 10 to prevent the
equipment from starting unexpectedly.
D
Keep hands and fingers away from the priming piston during operation and whenever the pump is
charged with air.
D
Keep your hands away from the wiper plate and the lip of the fluid container while the ram is oper-
ating.
D
Do not place your fingers into the air motor coupling cavity while the pump is operating.
D
Do not shut off the air supply to the ram while it is being raised. Doing so will cause the pump to fall
uncontrolled to the bottom.
