background image

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the

skin, inhaled, or swallowed.

Know the specific hazards of the fluid you are using.

Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,

state and national guidelines.

Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid

and solvent manufacturer.

Pipe and dispose of the exhaust air safely, away from people, animals, and food handling areas.

If the diaphragm fails, the fluid is exhausted along with the air. See 

Air Exhaust Ventilation

 in

the separate pump manual 308–553.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and

result in a fire or explosion and serious injury.

Ground the equipment. Refer to 

Grounding

 on page 9.

If there is any static sparking or you feel an electric shock while using this equipment, 

stop

pumping immediately.

 Do not use the equipment until you identify and correct the problem.

Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid

being pumped.

Pipe and dispose of the exhaust air safely, away from all sources of ignition. If the diaphragm

fails, the fluid is exhausted along with the air. See 

Air Exhaust Ventilation

 in the separate pump

manual 308–553.

Keep the work area free of debris, including solvent, rags, and gasoline.

Electrically disconnect all equipment in the work area.

Extinguish all open flames or pilot lights in the work area.

Do not smoke in the work area.

Do not turn on or off any light switch in the work area while operating or if fumes are present.

Do not operate a gasoline engine in the work area.

WARNING

WARNING

Summary of Contents for 224-833





















Reviews: