Graco 222602, Instruction Manual

Page: 4 / 10

Installation
4 307637S
Installation
1. Apply thread sealant to the male threads of the
bushing (20g) and install the air regulator (20) at the
pump air inlet. (F
IG
. 1)
2. Apply thread sealant to the male threads of the
elbow (11) and install the dispense valve assembly
at the pump outlet. (F
IG
. 1)
3. Install the pump in the bung hole of a fluid supply
container. Screw the bung adapter (A) tightly into
the hole. Raise the pump about 1/2 inch (12 mm)
from the bottom of the container. Tighten the bung
adapter screw. (F
IG
. 1)
Fluid and Solvent Compatibility
F
IG
. 1
20g
20
A
11
1a
12
To reduce the risk of component rupture, which can
result in serious bodily injury, all fluids used in this
pump must be chemically compatible with the wetted
parts shown on page 8. Consult your fluid suppplier
to ensure compatibility.