INSTRUCTIONS–PARTS LIST
307–870
Rev. F
Supersedes E
Evacuation System Accessories
Installation Kit for Waste Oil Receiver Evacuation System
Part No. 222–147
Receiver Evacuation Kit
Part No. 222–007
Air Supply Kit
Part No. 221–147
Suction Wand Kits
Part No. 221–146
15 in. Wands
Part No. 224–761
32 in. Wands
Part No. 224–762
48 in. Wands
Evacuation Control Valve
Part No. 220–969
Ground Clamp Part No. 103–538
Grounding Wire Part No. 208–950
Waste Oil Suction Tube
Part No. 222–178
Vacuum Gauge
Part No. 185–069
Suction Wand Holder
Part No. 185–068
IMPORTANT
Installation and use must be in accordance with the
Flammable and Combustible Liquids Code (NFPA 30)
and Automotive and Marine Service Station Code
(NFPA 30A) and must comply with all local, state and
federal codes.
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
COPYRIGHT 1988, GRACO INC.
This manual contains important
warnings and information.
READ AND RETAIN FOR REFERENCE
Typical Evacuation
System shown
NOTE: For clarity in this
illustration, the air hose and
regulator to the pump are shown
above the level of the air inlet. For
efficient operation, these parts
must be level with the air inlet of
the pump.
