63
Installation Instructions
To install the needle plate onto the quilting machine, take the following steps:
4.
Slowly lower the needle with the hand wheel.
The needle should slide into the center hole
without contacting the needle plate.
4
Reinstalling the Needle Plate (Continued)
Maintaining the Machine
1.
Power off the machine. Raise the needle to
the highest position using the
hand wheel
.
1
5.
Place the two
needle plate screws
(shown
in gray) into the plate. Make sure the needle
plate is centered around the needle, and
then tighten the screws with the flat-head
screwdriver.
5
Needle Plate
2.
Slide the
needle plate onto the machine.
2
3. Align the screw holes on the needle plate
with those on the machine.
3
Hand Wheel
