Hook Holder
1. Rotate your hook assembly so that the positioning guide is at the highest point during rotation.
2.
Attach your hook holder to your sewing machine with a M5 X 10 SBHCS (don’t tighten the screw
during this step) with the hook holder’s finger in the middle of the hook assembly’s positioning
guide.
3.
Slide your hook holder away from the hook assembly so there is about a 0.75mm gap (it’s hard
to measure so just make it as big of a gap as possible) between the hook holder and the hook
assembly, and tighten the M5 X 10 SBHCS.
The Hook Holder
Tools Needed:
• 3mm Allen Wrench - Green Handle
Hook Assembly
0.75mm Gap
between Hook
Holder and Hook
Assembly
Hook Assembly
Positioning
Guide
M5 X 10 FHCS
28
