14
Winding The Bobbin
1. Place the thread on the thread stand.
2. Pass the thread through the hooks in the thread mast.
3. Pull the thread through the bobbin thread guide at the back of the
quilting machine.
4. Loop the thread around the spring hook and around the thread
tensioner.
5.
Wrap the thread around the bobbin as shown.
6. Start the bobbin winder by pushing the bobbin winder cam into the
bobbin.
When the bobbin is full it will automatically stop.
When the bobbin is full you can cut
the thread with the thread cutter
found next to the bobbin stand.
The bobbin winder runs
on a separate motor from
the quilting machine. This
allows you to wind bobbins
with the quilting machine
running or stopped, as
long as the power is on.
1
2
3
4
5
6
The bobbin winds in a
clockwise direction
Push Bobbin
Winder Cam
Make sure the
thread is between
the tensioner discs
Adjust the
cam so that
the bobbin
does not
over-fill
Thread
Cutter
Thread
Mast
A bobbin winder tutorial is availablie on our website at:
http://www.qniquequilter.com/videos/tutorials/
QR CODE
