33
Part Three
With all feet set to the lowest position, it’s time to test how level the frame is. Bring the machine
to the rear left corner of the frame, and gently release it. If the machine drifts toward any of the
feet, that foot may need to be raised. Raise the frame in slow increments by turning the bottom
nut on the foot clockwise, and re-test frequently while making adjustments.
2
Test all four corners of the frame, slowly raising any foot that the machine drifts toward until the
machine no longer drifts. When satisfied, tighten the top leveling foot nut with the 17 mm Allen
wrench on all feet to lock them in place.
3
Raise this foot
if the machine
drifts to the
right.
Raise this foot if
the machine
drifts toward the
center.
Raise this foot
if the machine
drifts forward.
Top Nut (x4)
Task 10 - Level the Frame (Continued)
