manualshive.com logo in svg

Grace Q-Zone Hoop-Grame, Assembly & Use Instructions

Share
Download
Grace Q-Zone Hoop-Grame Assembly & Use Instructions Download Page 21

16

Congratulations! You have completed Part One of the assembly instructions for your frame. Before 

continuing to Part Two of these instructions, complete any of the following that apply to you:

•  Wheeled quilting machine users:

 Complete Part One of your instruction manual and follow 

the instructions provided at the end of Part One to determine what manual to go to next.

Note if your machine manual is not broken into parts, complete the following in 

order:

 

1.  Install the lower encoder on the machine according to your machine’s instruction 

manual.

2.  Complete Part One of your QuiltMotion manual if you will be setting up the QuiltMotion 

automation accessory today. Otherwise, skip this step.

3.  Complete the steps to install and adjust your machine wheels according to your 

machine’s instruction manual.

4.  Then complete Part Two of your QuiltMotion manual, if applicable.

•  Top plate and wheel-less sewing/quilting machine users:

 assemble the top plate now 

according to your top plate instruction manual. If you’ll be using QuiltMotion, complete Part One 

and Two of your QuiltMotion manual after assembling your top plate.

Part One 

Summary of Contents for Q-Zone Hoop-Grame




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands