m908 User Manual, Rev. G
For features that only require numbers there is a simplified Numeric Input Screen. It is used
for entering Ethernet IP address and subnet mask numbers.
In the
both
screens the current name is displayed in the text edit window in the upper right
portion of the screen. The maximum number of characters for a custom name is 12.
The upper section of the keyboard contains numbers, letters, and special characters. The lower
section of the keyboard contains the following text editing tools:
1. FIRST Moves the cursor to the left most position in the text edit window
2. LEFT
Moves the cursor one character to the left
3. RIGHT Moves the cursor one character to the right
4. LAST Moves the cursor to the right most position of the current test string
5. CAPS Toggles between upper case and lower case letters
6. CLEAR Clears all text from the text edit window
7. BKSPC Removes the character to the left of the cursor
8. DEL
Removes the character to the right of the cursor
9. CANCEL
Exits the
Name
screen without saving changes
10. ENTER
Saves changes and exits the
Name
screen
Note: Pressing the SETUP switch while in the Name/Number edit screen will exit without
saving changes. Be sure to select ENTER and click the encoder or push the SOLO/MUTE switch
to save the changes and exit.
Navigation:
Turning the VOLUME encoder will scroll through all the keys in the keyboard. The selected
key will be highlighted in blue. Pushing the VOLUME encoder will press the highlighted key.
The keyboard can also be navigated with the illuminated switches in the SOLO/MUTE section of
the RCU front panel. The SUB, LB, RB, and B switches act as up down left right navigation
keys. The SOLO/MUTE switch has the same "ENTER" function as pushing the VOLUME
Page 75 of 135
Illustration 66: Number Edit Screen
