28
►
Slip the rudder outrigger assembly from
the rear over the centre of the rear frame
element.
►
Insert both bolts through the pre-drilled
holes and secure by means of the wing
nuts.
►
Attach the tiller to the rudder head.
►
Press the locking knob and insert the til-
ler into rudder head tube until it locks.
RUDDER
►
Clip the rudder to the rudder hinge.
ATTENTION: When placing the sail, pull
it to the mast so that it goes directly into
the groove.
Das fall gerade nach unten oder etwas
nach vorne ziehen. Nicht zur Seite oder
nach hinten.
►
Tension the mast
leech by pulling
the luff tensioner
downward.
►
Attach the shroud wind flag to the exter-
nal shroud. (Red - portside, green – star-
board side)
