Page 6 of 6
Your source for quality GNSS Networking Solutions and Design Services!
Date: 6/4/07
Document number: 236
Rev. 002 Organization: S&M
Help
The Help menu displays the serial
number of the device, the version of the
firmware, and the URL of GPS Source
for service and support.
Instructions
10. press middle (down) button until ‘Help’
appears on screen
11. press ‘Enter’
12. View information specific to product by
using up/down arrows
Antenna Power On Off
The Antenna operation turns the
antenna power on and off .
Note: Antenna power is on the input
port. This action does not affect the
output port, so this will not turn off
power to the devices powered by the
output port provided the output port it is
a pass DC(PDC) port.
Antenna VDC
Displays the voltage that is available to
power the output ports.
Note: this only displays the voltage
available to the ports. If a port is DCB
(DC blocked) then this does not mean
there is voltage present on the port only
if a port is enabled to pass DC (PDC)
will the voltage be available on the
port[s]. So no matter what this reads
there will only be voltage on a port if it is
PDC.
