Page 7/ 35
The GPS_DESIGNER operation is organized into four
main pages: the Satellite Page, the Navigation page
,the
Position Page
,
and the Map Page. Normally, every time
you turn on the GPS_DESIGNER, you
’
d better switch
into Satellite page and check satellites status first then
start operation.
When you press
POWER
key to start up the unit, you
can press
ESCAPE
key to switch among these four main
pages. And from this main pages, press
ENTER
key, the
unit pops up the Menu page. Here you could select
specific section you want to enter and make further
operation.
In the Menu page, there are twelve options: MARK,
W_LIST, R_LIST, T_LIST , P_WPT,SETUP ,
MEASURE,FIND,H & F,S & M,TOOLS,COMMU.
Press
UP / DOWN
key to highlight the option you want,
and then press
ENTER
key, you are able to go on further
operation. Or press
ESCAPE
key in the Menu page, you
can withdraw from Menu page and back to those four
main pages.If you want to lock the screen, press long
up
key;ulock the screen, press long
up
key.
Reference
Operation Structure
Operation Structure
3
E
S
C
A
P
E
1
2
4
ESCAPE or
Wait for 30
seconds
PDF created with pdfFactory Pro trial version
www.pdffactory.com
