16
www.gpodisplay.com
NEX-series Video wall
Configuration of Video Wall Displays
Configuration of units for video wall display
1. Make sure the main power switch on each display is ON (The main power switch is located on
the back of the display where the power cord connects)
2. Power on the 3x3 display by turning power on to each display individually
3. Set up each display’s Video Wall settings => Enter OSD menu mode by pressing the MENU
button on the IR remote controller while pointing remote controller at display’s IR receiver.
4. Set the Display Sequence, Horizontal Set Count and Vertical Set count for all of the units
as shown in the table below:
Set 1
Set 2
Set 3
Set 4
Set 5
Set 6
Set 7
Set 8
Set 9
Display Sequence (DS)
1
2
3
4
5
6
7
8
9
H Set Count
3
3
3
3
3
3
3
3
3
V Set Count
3
3
3
3
3
3
3
3
3
H Edge Adjust
0
0
0
0
0
0
0
0
0
V Edge Adjust.
0
0
0
0
0
0
0
0
0
Set ID
1
2
3
4
5
6
7
8
9
Tips:
- Set ID : Assign prior to installation for ease of control
- SICP software is recommended for changing the values below:
