5
MOUNTING MATERIAL AND
ACCESSORIES
Signal cables
Signal cables are a part of the ultrasonic transducers
and cannot be separated from transducers.
Spacer bar for transducer mounting
For transducers F10 and F21 (Transducer QMF-F05
is mounted on pipes using textile tape rather than
spacer bar).
FIGURE 6:
Spacer bar
Metal Mounting Belt for Transducer
Mounting
FIGURE 7:
Mounting Belt (Stainless Steel)
FIGURE 8:
Transducers Mounted with Spacer Bar and
Mounting Belts
Coupling grease
Apply the ultrasonic coupling gel between the ultra-
sonic transducer and the piping in order to optimize
signal input.
QMF-PT100 Temperature sensors
The clamp-on temperature sensors collect tem-
perature data in heating and cooling circuits.
This data is then used to calculate heating and cooling
quantities.
FIGURE 9:
Clamp-on temperature sensors, QMF-PT100
(optional)
FIGURE 10:
QMF-PT100 (optional) Temperature Sensor
Mounted with Metal Belt
Interfaces of UFM
Open the cover to access the connecting terminals.
FIGURE 11:
Front view of transmitter showing cover
Cover
Remove
Screws
FIXED UFM AND COMPONENTS (Continued)
TEL: 888-722-3569 • 973-940-1684 • FAX: 1-973-940-1651 • www.GPImeters.com