APPLIES TO PORTABLE QSTAR
12
2. Select the “Time and Date” menu command
Time
Displays the current time (system time). The time stamp
that is derived from the system time will be applied to
the measurement data.
SD memory
Displays the free space on the internal SD memory
card of the device (standard is 2 GB).
Backup battery
Provides information about the status of the recharge-
able battery.
•
Load:
The device is powered using the power
adapter while the battery is charged. The empty
battery needs a charging time of approximately five
hours.
•
Full:
The battery is in a charged state. The device
may be operated for approximately five hours when
the display backlight is switched off or for approxi
-
mately three hours when it is switched on.
Percentage display
Displays the charging state of the battery.
The times specified applies to a new battery. The factual
operating/load cycles may deviate from the specified
time values.
The status bar is located in the uppermost row of the display.
3. Enter the time as:
Hour (hh): Minute (mm): Second (ss).
Enter the date as:
Month (mm): Day (dd): Year (yy).