Wearing the sleeves:
1. Attach the air line connectors to the desired sleeve(s). Make sure the red
arrows are aligned with each other. (See next page)
2. On the full-limb sleeves (full arm and full leg), there are two pairs of water line
connectors on each sleeve. The shorter sleeves have one pair of water line
connectors each. Connect all water line connectors that are on the sleeves to
the water lines from the control unit. (See next page)
3. Insert the designated limb into the sleeve designed to hold it. For the arm
sleeve, wrap the Velcro strap under the armpit of the opposite arm and secure.
It may be necessary to unfasten the sleeves first by unzipping or pulling apart
the Velcro before wearing.
4. Before and after using the sleeves, wipe the inside and outside with a 70%
alcohol solution. It may be necessary to unzip the sleeves to do this.
Afterwards, dry with a dry cloth. Sleeves are not machine-washable.
Page 2
1. Upon first use, please check the water and air lines for any leakages.
2. Upon first use, please check the water and air bladders for any
leakages.
3. Users are advised to add 100 ml of a 70% alcohol solution into the
water reservoir to promote the longevity of the sleeves.
