3
Thank you for selecting this
GoWISE USA
Blood Pressure Monitor. It features blood
pressure measurement, pulse rate measurement, auto
‐
save results, and a long life of reliable
service.
Measurements taken by GW22052 are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information as well as step
‐
by
‐
step
instructions for using the product. Read the manual carefully and thoroughly before using the
product.
Features:
•
Wide Cuff range of 9
‐
13” (22
‐
32 cm)
•
Blood Pressure Classification
•
60 Memory Recall
•
Irregular Heartbeat Detection and Hypertension Risk Indicator
•
AC Adaptor
•
Touch sensitive buttons
•
Large digital LCD V.A. display 3.2” x 2.4” (80mm x 60mm)
•
Measurement appears during inflation
CAUTION
This device is intended for adult use only.
This device is intended for non
‐
invasive measuring of arterial blood pressure. It is not intended
for use on extremities other than the arm or for fluctuations other than obtaining a blood pressure
measurement.
Do not confuse self
‐
monitoring with self
‐
diagnosis—this unit allows you to monitor your blood
pressure. Always consult a physician before beginning or ending a medical treatment.
If you are taking medication, consult your physician to determine the most appropriate time to
measure your blood pressure. Never change a prescribed medication without consulting your physician.
This unit is not suitable for continuous monitoring during medical emergencies or operations.
The unit will automatically deflate, when the cuff pressure exceeds 40 kPa (300 mmHg). Should
the cuff not deflate when pressure exceeds 40 KPa (300 mmHg), detach the cuff from arm and press the
START/STOP button to stop inflation.
To avoid measurement errors, carefully read this manual before using the product.
The equipment is not AP/APG equipment and is not suitable for use in the presence of a
flammable anesthetic mixture with air or with oxygen or nitrous oxide.
The operator shall not touch output of AC adaptor and the patient simultaneously.
To avoid measurement errors, avoid the condition of strong electromagnetic field radiated
interference signal or electrical fast transient/burst signal when using the AC adaptor.
Inspect the monitor and accessories for proper working condition before each use. Store them
carefully to avoid damage. The AC adaptor cord, air hose, and arm cuff should not be kinked or folded
tightly. While in storage, the AC adaptor should be placed underneath the main unit so it does not
damage the display. (See more information in the Maintenance section of this manual.)
Please note that Luer lock connectors are not used on this product, and DO NOT change any
provided connectors. Do not wind the air hose around your neck.
