background image

Model 75-850-BV / 75-852-BV H

2

 Separator w/ Manual Bypass Valve

09/20 Rev. 7 

11

Warranty

ALL INSTRUMENTS SOLD BY GOW-MAC

®

 INSTRUMENT CO. ARE WARRANTED FOR A PERIOD 

OF ONE YEAR AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP. THE TERMS OF THIS 

WARRANTY ARE AS FOLLOWS:

1.  The warranty period begins with the shipping date of the equipment to the original purchaser.
2.  Certain parts such as batteries, fused, glass accessories, septa, columns, etc., are expendable in normal use, 

and their service life is unpredictable. Such items are not covered by this warranty.

3.  Filaments of thermal conductivity detectors are not covered by this warranty.
4.  All requests for service or repair under this warranty must be received within the warranty period by 

GOW-MAC

®

 or its authorized representative. All repairs are made at GOW-MAC plants or at the offi  ce of 

authorized representatives.

5.  All repairs, adjustments, and other service under this warranty shall be performed free of charge to the 

purchaser. However, warranty service and repairs shall be limited to equipment malfunctions which, in the 

opinion of GOW-MAC

®

, are due or traceable to defects in original materials or workmanship. Instrument 

malfunctions caused by abuse or neglect of the equipment are expressly not covered by this warranty.

6.  Instrument parts which have been repaired or replaced during the warranty period are themselves warranted 

only for the remaining unexpired portion of the original one year warranty.

7.  Repairs, adjustments, and service performed after expiration of the one year warranty period shall be charged 

to the purchaser at the then current prices for parts, labor, and transportation.

8.  This warranty attaches to the equipment itself and is not limited to the original purchaser. Unexpired portions 

of the warranty are thus transferable to subsequent owners.

9. GOW-MAC

®

 expressly disclaims any liability to users of its products for consequential damages of any 

kind arising out of or connected with the use of its products.

10.  Except as stated in Sections 1 through 8 above, GOW-MAC

®

 makes no warranty, expressed or implied 

(either in fact or by operation of law), statutory or otherwise; and, except as stated in Sections 1 through 8 

above, GOW-MAC

®

 shall have no liability under any warranty, expressed or implied (either in fact or by 

operation of law), statutory or otherwise.

11.  Statements made by any person, including representatives of GOW-MAC

®

 which are inconsistent or in 

confl ict with the terms of this warranty shall not be binding upon GOW-MAC

® 

unless reduced to writing 

and approved by an offi  cer of the Company.

12.  This warranty shall be governed by the laws of the Commonwealth of Pennsylvania.

Summary of Contents for 75-850-BV















Reviews: