50
DVD Player User’s Guide
Video Settings
The Video menu allows you to set your
preferred aspect ratio for DVD movies
and specify your video connection
method.
1
From Stop mode, press SETUP.
2
Select Video and press ENTER.
3
Use the
keys to select each of
the following:
TV Aspect Ratio
Sets your preferred format for DVD
movies to match the shape of your
television screen.
•
Select “Set TV Aspect”, and then use
the
keys to select:
Fullscreen
(Default) - Se-
lect if you have a standard
4:3 television and prefer to
watch full-screen versions
of DVD movies (if available).
Letterbox
- Select if
you have a standard 4:3
television and prefer to
watch widescreen versions of DVD
movies (if available). Movies will
display in letterbox format; i.e., black
bars will appear above and below the
picture.
16:9
- Select if you have
a widescreen 16:9 tele-
vision.
Video Output
Sets the Video Output to match the
method you used to connect the DVD
Player to your TV.
•
Press the VIDEO OUT* button repeat-
edly to select:
Composite
(Default) - Select if you
connected the DVD Player to your TV
using the Composite Video output.
S-Video
- Select if you connected
the DVD Player to your TV using the
S-Video output.
Component
- Select if you connected
the DVD Player to your TV using the
Component Video output.
Progressive
- Select if you connected
the DVD Player to your TV using the
Progressive Video output. If your TV
does not have a Progressive Scan
input, the screen will go blank when
you select Progressive Scan. Press
VIDEO OUT again to select a different
Video Output.
4
Select OK and press ENTER.
5
Press SETUP or RETURN to exit the
Setup menu.
NOTE:
• The VIDEO OUT key allows you to
switch between PS (Progressive Scan)
and IS (Interlace Scan) modes.