manualshive.com logo in svg

GoVideo CCTV28, User Manual, Page: 17 / 17

Share
Download
GoVideo CCTV28 User Manual Download Page 17

Pages  from 

Go

Video

  Test-CCTV28

 

User  Manual

 

                           

www.allthings.com.au

 

WIDE:      The tester will search up the ID step by step (from 1 to 256). When the ID is 

searched, the PTZ    camera will stop panning. 

FAR:        The tester will search up the ID step by step (from 256 to 1). When the ID is 

searched, the PTZ camera will stop panning. 

 

Press 

  button,    the tester will search up the ID quickly and continuously(from 1 to 256). 

When the ID is searched, the PTZ camera will pan right. At this time, please press any key to stop 

searching up. Press

  manual single-step decreasing button, the tester will search up the ID 

step by step (from 256 to 1). When the ID is searched, the PTZ camera will stop panning. 

 

Press 

  button , the tester will search up the ID quickly and continuously(from 256 to 1). 

When the ID is searched, the PTZ camera will pan left. At this time, please press any key to stop 

searching up. Press 

  manual single-step incremental button

，

the tester will search up the ID 

step by step (from 1 to 256). When the ID is searched, the PTZ    camera will stop panning. 

Press the direction control button to adjust Speed Dome Camera. Press

  button to quit from 

the address-scanning function menu.

 

 

Summary of Contents for CCTV28


















Reviews:

No comments